Pet ProductsFeeTech 6V 2.3kg Dual Axis Serial Bus Servo

Title Default Title
Qty:

Description

  • 6V 2.3kg Dual Axis Serial Bus Servo by FeeTech
  • Gear Type: Copper + Steel
  • Limit angle: No limit
  • Bearing: No Ball bearings
  • Horn Type: Plastic, POM
  • Motor: Core motor

The FeeTech 6V 2.3kg Dual Axis Serial Bus Servo is a 6V 2.3kg Dual axis serial bus servo that adopts a plastic case metal gearbox core motor Feetech self-researched and developed TTL control board high-quality potentiometer 25T output shaft.

The stall torque is 2.3 kg.cm effective control angle is 300° with servo mode and continuous motor working mode feedback position, speed, voltage, temperature, and load parameters, so as to achieve overload protection. It is suitable for teaching maker robot joints and other small torque transmission applications.

  • 1x FeeTech 6V 2.3kg Dual Axis Serial Bus Servo

Size

  • 23.2 x 12 x 25.5 mm (L x W x H)
  • Connector Wire: 15 cm
  • Gear Type: Copper + Steel
  • Limit angle: No limit
  • Bearing: No Ball bearings
  • Horn gear spline: 20T / OD 3.95 mm
  • Horn Type: Plastic, POM
  • Case: PC
  • Motor: Core motor
  • Operating Voltage Range: 4.8 - 7.4 V
  • No-load speed: 0.1 sec/60° (100 RPM) at 6 V
  • Running current (at no-load): 150 mA at 6 V
  • Peak stall torque: 2.3 kg.cm at 6 V
  • Rated torque: 0.7 kg.cm at 6 V
  • Stall current: 1.0 A at 6 V
  • Command signal: Digital Packet
  • Protocol Type: Half duplex Asynchronous Serial Communication
  • Communication Speed: 38.400 bps ~ 1 Mbps
  • Running degree: 300° (when 0 ~ 1.024)
  • Position Sensor Resolution: 0.293° (300° / 1.024)
  • Storage Temperature Range: -30 ~ 80 °C
  • Operating Temperature Range: -15 ~ 70 °C
  • Weight: 13.2 ± 1 g