- Rabbit grass rack to prevent waste food boxFeeTech 7.4V 65kg 360 Degree Magnetic Encoders Steel Gear Servo

Title Default Title
Qty:

Description

  • 7.4V 65kg 360 Degree Magnetic Encoders Steel Gear Servo by FeeTech
  • Gear Type: Steel
  • Bearing: Ball bearings
  • Horn gear spline: 15T / 7.6 mm
  • Case: Aluminum
  • Motor: Core Motor

The FeeTech 7.4V 65kg 360 Degree Magnetic Encoders Steel Gear Servo comes with a steel gear. It runs on an operating voltage range between 4.8 V - 8.4 V and Idle current (at stopped): 30 mA at 7.4 V. The pulse width range is 500 ~ 2.500 μ sec.

  • 1x FeeTech 7.4V 65KG 360 Degree Magnetic Encoders Steel Gear Servo

Size

  • 65 x 30 x 58.4 mm (L x W x H)
  • Connector Wire: 23 cm
  • Gear Type: Steel
  • Limit angle: No limit
  • Bearing: Ball bearings
  • Horn gear spline: 15T / 7.6 mm
  • Gear Ratio: 1:305
  • Case: Aluminum
  • Motor: Core Motor
  • Operating Voltage Range: 4.8 - 8.4 V
  • Idle current (at stopped): 30 mA at 7.4 V
  • No-load speed: 0.227 sec / 60° (44 RPM) at 7.4 V
  • Running current (at no-load): 300 mA at 7.4 V
  • Peak stall torque: 65 kg.cm at 7.4 V
  • Rated torque: 21.5 kg.cm at 7.4 V
  • Stall current: 10.2 A at 7.4 V
  • Command signal: Pulse width modulation
  • Control System Type: Digital comparator
  • Pulse width range: 500 ~ 2.500 μ sec
  • Stop position: 1.500 μ sec
  • Running degree: 360° (at 500 - 2.500 μsec)
  • Dead band width: ≤4 μ sec
  • Rotating direction: Counterclockwise (1.500 - 2.500 μ sec)
  • Electronic Protection: Stall 4 sec
  • Temperature protection: >70 °C
  • Storage Temperature Range: -30 ~ 80 °C
  • Operating Temperature Range: -20 ~ 60 °C
  • Weight: 235.2 g ± 1 g